SD-2x1Wire Environment Monitors with WiFi

The SD-2×1Wire Environment Monitor with WiFi is an environment monitor for connecting thermometers, humidity sensors and other devices via a 1-Wire bus. Up to four sensors can be connected, using a 1-Wire or a 1-Wire UNI bus. For configuration the SD-2×1Wire has a built-in web server and WiFi connectivity and the device can be remotely monitored over the internet using the SensDesk portal or SensDesk Mobile App (iOS or Android). Using SensDesk the device can send email alerts when the measurements are outside a specified range of values. Text messages (SMS) can also be sent via the SensDesk, if an SMS-GW3 module is attached to the network.

Key Features

• Wired Ethernet and WiFi: 802.11 b/g/n (2.4GHz)
• Support for simultaneous Ethernet and WiFi operations
• Power: 5Vdc or PoE
• Simple installation and supports DHCP
• Embedded WEB server
• Security protected with a password
• Works with the SensDesk Cloud portal

Applications

• Air conditioning failure detection
• Temperature monitoring in refrigerators
• HVAC monitoring
• HVAC optimization

1-Wire UNI Sensors

• 100A (30A) DC Current probe 1W-UNI
• 30A Current probe 1W-UNI 2
• Temp-1W-UNI Pt100 Frost
• Temp-1W-UNI Pt100 Cable
• Sensor 230V AC 1W-UNI
• Sensor 4-20mA 1W-UNI
• Light 1Wire-UNI
• Sensor 60V 1W-UNI v2
• Sensor 0-20mA 1W-UNI

1-Wire Temperature Sensors

• Temp 1Wire Pt1000
• Temp-1Wire 3m calibrated
• Temp-1Wire IP67
• Temp-1Wire Rack 19
• Temp-1Wire-Outdoor
• Temp-1Wire-Flat 3m
• Temp-1Wire

1-Wire Temperature and Humidity Sensors

• HTemp-1Wire
• HTemp-1Wire Rack 19
• HTemp-1Wire-Box2
• HTemp-1Wire 3m
• HTemp-1-Wire Outdoor

Detectors

• Flood detector 1W-UNI 3m

Converters

• Relay Output 1W-UNI
• Converter 2xPt100 1W-UNI
• Expander 4xDI 1W-UNI

Physical Installation

• Metal Case: IP40
• Installation: Wall
• Design: Industrial environments

Operation Schematic