Climate change is driving up ambient temperatures and causing extreme weather patterns. For server room and datacentre operators, these environmental issues are placing a greater strain on their critical infrastructure systems. Server room air conditioning systems are placed under greater load during heatwave conditions and UPS systems must use their battery power more often to cover small power outages and complete mains power failures.
Monitoring Configuration Setup and Support
Server Room Environments provides a configuration and setup service for your chosen remote environmental monitoring system. We provide support and assistance to help you setup notifications and alerts and integrate your system(s) with your BMS, NMS, IoT and DCIM platform(s). This is provided remotely unless you have ordered an onsite installation service.
-
Solutions (39)
- Temperature & Humidity (31)
- Water Leakage Detection (28)
- Server Rack Monitoring (29)
- BESS Systems (6)
- Generators (4)
- Remote Outdoor Cabinets (10)
- UPS and Rectifier Batteries (7)
- UPS / CSS / CPSS Systems (6)
- Branch Power Circuits (10)
- Door Access/Security (27)
- Energy Monitoring (3)
- Power Supplies (AC/DC) (32)
- Data Centres (8)
- Industrial Sites (26)
- Laboratories (21)
- Pharmaceutical (21)
- Solar PV Farms (6)
- Warehouses (20)
- Base Units (39)
- Sensors (149)
- Accessories (173)
- Services
Automated Messaging and Alert Notifications
You can receive notifications when a monitored condition changes state or the measured sensor data goes outside a preset threshold.
- Email: encrypted email notifications via SSL/TLS and STARTTLS
- SMS: optional cellular modem (built-in or external connection) for SMS alerts and phone calls (simulated voice)
In addition to these automated alert scripts, you can see live information via a web browser or am appropriate monitoring platform, using one of the protocols listed below.
Computer and Server Room Network & Management Integrations
You can integrate our monitoring devices into your IP network. The most popular are shown below. Each base unit comes with a built-in web browser and the devices are password protected.
- SNMP: SNMPv1, SNMPv2c, and SNMPv3 (GET and with encrypted SNMP traps); MIB available upon request
- Time & Logging: NTP (Network Time Protocol) and Rsyslog
- Web & Security: HTTP, HTTPS, VPN, and TLS/SSL
- IP Stack: IPv4 and IPv6
- MQTT: MQTT and MQTTS (secure MQTT)
- Authentication: option for RADIUS and TACACS+ user authentication
If you already have SNMP monitoring in place for your other critical systems, then it is straight forward to add your monitoring base units into the same system.
You can also set-up Watchdog alerts and time-of-day Heartbeat messages.
Datacentre Infrastructure Management (DCIM) Integration
For clients running multiple devices and a compatible DCIM across a large data centre or multi-site facility. The most popular DCIMs that we have integrated to include:
- ABB Decathlon
- Centeros DCIM
- Cisco Nexus
- IBM Open View/ Data Center Services
- Nagios
- Nlyte
- Open NMS
- Paessler PRTG Network Monitor
- Schneider EcoStruxure
- SolarWinds
- Sunbird DCIM
- Zabbix
The list of DCIM packages is not comprehensive and shows a selection of the most popular DCIMs we integrate with.
Automation and Industrial Integrations
For building management system integration we recommend BACnet where SNMP is not an option.
- BACnet: native BACnet/IP support for direct integration with Building Management Systems (BMS) or for streaming sensor data directly to cloud applications and IoT platforms on Amazon AWS, Google Cloud, or Microsoft Azure
- Modbus TCP/IP: to provide sensor information to a BMS, SCADA or Plc system
- Modbus RTU: to integrate with controllers, field buses and third-party gateways
- Virtual Sensors: used to bring in information from third-party devices
Modbus integrations are possible uisng TCP/IP or RTU. Virtual sensors allows the integration of third-party systems to the monitoring base unit which acts as a single monitoring gateway.
On-Premises or Cloud-based Software
Each of our environmental monitoring system partners also provides their own monitoring and control software packages. These includes on-premises and cloud-based software which can be used to provide an overview of the base monitoring unit and the connected sensors.
The functionality is similar to that of a DCIM package but is limited to the devices the on-premises or cloud software packages are compatible with. ACKP, HW group and Avtech RoomAlert have their own dedicated software packages.
Please contact our Projects team for more information on integration protocols and how to get the most out of your chosen monitoring solution.
Related FAQs

Earn SRE points on all online purchases with double points on selected products





























