Avtech 50A Current Loop 1 Sensors monitor the electrical current flowing through a single-phase powered cable. The sensor outputs a signal of 0 to 5Vdc is converted into a current (A) reading by a built-on or external Room Alert Sensor port.
Key Features
| Item |
Specification |
| Environment Condition Monitored |
Electrical current (amps) |
| Type of Sensor |
Switch |
| Power Supply |
Induced from monitored conductor |
| Included Sensor Cable Type |
Low-voltage 2-wire speaker cable |
| Included Sensor Cable Length |
7.5m (25ft) |
| Maximum Sensor Cable Length |
30m (100ft) |
| Output Voltage |
0 to 5 Vdc |
| Input Amperage Range |
0 to 50A |
| Accuracy |
+/-1.0% (5 to 100% FSO) |
| Response Time |
less than 100 mS |
| Operating Frequency Range |
50 to 600Hz |
| Isolation Voltage |
2,200Vac |
| Maximum Sensing Current Voltage |
600Vac |
| Aperture (Hole) Size |
0.75inch (accepts cables up to 350 MCM) |
| DIN Rail Size |
35mm |
| Operating Temperature Range |
minus 15 to 40defC (5 to 104degF) |
| Operating Humidity Range |
0 to 95% RH, non-condensing |
| Enclosure Rating |
UL94-5VB |
| Compatible Products |
Room Alert Analog Sensor Port (built-in or external) |
By pairing a 50A Current Loop with a Room Alert environment monitor, the power consumption of electrical devices can be determined relatively easily. The current loop sensor can be easily moved to between appliances and used to identify power issues.
