Does Redetec units have remote signalling?

A Redetec unit as standard has volt free contacts for 1st Stage Fire (Pre-alarm), 2nd Stage Fire (Confirmed alarm) & Fault condition which can easily be connected to a BMS system or Intelligent UPS and/or the main building Fire Alarm System to give the earliest possible warning of an incident.

The Redetec system is set to ‘double-knock’ as default and can easily set to operate on a ‘single-knock’ basis if required.

There is also an optional IP module to provide remote monitoring over an IP network, sending alerts for 1st Stage Fire (Pre-alarm), 2nd Stage Fire (Confirmed alarm) & Fault conditions to up to three email addresses via SMTP or SNMP, with each unit is fully configurable via a built in Web Server.