Air Conditioned Server Racks

If your cabinets are only partially populated and have perforated ventilation holes in the front and rear, you may not need additional cooling fan kits. Server manufacturers typically recommend a minimum perforation factor for the doors of the cabinets that would be used to house their servers and this is typically from 63% upwards; to allow adequate air flow from front to rear.

Server racks are designed for front air intake and rear cabinet exit. Cool or air conditioned air should be drawn into the front of the rack by fans within the servers themselves or within the server racks and this then exits as warm air out of the rear of the cabinet. In a data hall server racks are typically positioned in rows and the rows positioned so that the fronts face each to optimise cool air and hot air flows. This is a basic for of hot-aisle/cold-aisle containment. The server racks may themselves be within a separate containment known as a hot-aisle/cold-aisle container. For some server racks we can also offer rear cooling doors to help collect the hot exhaust air. The cooling doors fit onto the rear of the cabinets and use chilled water pipes within the rear door. We can also supply additional cabinet fans for extra cooling capacity.

We can supply either completely assembled cabinets or semi-knock down kits to allow for ease of transportation and logistics on-site. Our logistics team will follow the project plan (previously agreed) to deliver your server racks and enclosures to site and position them. Where the cabinets are supplied as semi-knock down kits, our installations team can assemble these and move into position for you.