Price Check Guarantee

Price Check Guarantee

Nationwide Installations

Nationwide Installations

Next Day Deliveries

Next Day Deliveries

Free Expert Advice

Free Expert Advice

Free Site Survey

2kVA UPS Prices and Specifications

2kVA UPS systems available from Server Room Environments include line interactive and on-line uninterruptible power supply systems. 2kVA UPS will be rated at 2000VA and have different output Watts rating dependent upon the power factor used by the UPS manufacturer. Please check the individual products for their kW rating. The output connections can be plug and play or hardwired dependent on the model which can be available in free standing tower or 19inch rack mount formats with options for extended battery runtimes. 2kVA UPS have tower or rack mount or a dual installation format and are designed to protect workstations, servers and IT network peripherals including Internet of Things (IoT) applications. The UPS have IEC-type output sockets as standard.

Power section(s) Dropdown arrow sprite

UPS ApplicationsSubmenu expander (reset)
View All 16
UPS Form FactorSubmenu expander (reset)
UPS Phases (In/Out)Submenu expander (reset)
UPS Runtime OptionsSubmenu expander (reset)
UPS SizesSubmenu expander (reset)
BrandsSubmenu expander (reset)
Battery TypesSubmenu expander (reset)

2kVA Power Connections, Output Sockets and Mains Power Cords

A 2kVA (2000VA) UPS will typically have IEC320 C13 outlets on the rear panel. An IEC320 C13 is rated at 10A maximum and the total load capacity of the UPS should be exceeded. A 3kVA UPS may also have an IEC 320 C19 outlet for higher power loads. The IEC outlets may be grouped into two different groups to allow load shedding during a power outage, to increase the amount of battery support time available from a smaller load.

The UPS may be supplied with 1 or two IEC320 to IEC320 power cords. A mains power power cord will connect the UPS to a mains power supply using a in the UK a BS1363 3 square pin plug. 2000VA UPS for hardwired connection are available on application.

2000VA UPS Battery Runtimes

A 2kVA UPS will have an internal battery. Some of these UPS have an external battery pack connector for longer runtimes. The amount of battery runtime available is dependent upon the load placed onto the UPS and the age, battery charge % and ambient environment.

2kVA UPS Sizing and Single Phase Power Supplies

The standard UK single phase mains power supply voltage in the UK is 230Vac 50Hz. 2kVA = 2000VA which on a 230Vac supply means that a 3kVA UPS will be able to supply 8.69Amps in total (230Vx8.69Amps=2000VA). If you are sizing your UPS load in Watts or kW (2000Watts), the UPS should be suitably rated. A 3kVA UPS may be rated at unity power factor (1pF) which means that the UPS can supply 2VA/2kW of load. If the power factor is less (typically 0.9 or 0.8) then the Watt load should not exceed 1900W (1.9kW) or 1600W (1.6W).

2kVA UPS Installation Checklist

This is not an exhaustive list but provides some general check points when preparing to install a 2000VA uninterruptible power supply.

  • Calculate the actual load to be connected to the UPS. Formula Volts x Amps = VA or kVA.
  • How many output sockets are required and their type? 10A C13 or 16 C19 or hardwired.
  • Estimate the amount of battery back up time required. 5-10 minutes should be sufficient for an orderly systems shutdown and longer may require additional battery extension packs if the critical loads are to run for longer. For an IP connection a UPS SNMP card will be required.
  • Rack mount or Tower format. If a rack UPS is required calculate the U-height that the UPS will take up in a server cabinet (including additional battery extension packs) and note the maximum depth of the UPS system as you will require a server cabinet that can accommodate this.
  • UPS preventative maintenance planning. Will you need a UPS maintenance bypass to allow the UPS to be isolated without disruption to the connected critical loads.
  • UPS warranty and maintenance contracts. Warranties vary from 24months to 36 and longer. A UPS maintenance contract will provide emergency cover with a callout within a set working hours time or next day or a clock hour basis, and the contract should include an annual preventative maintenance plan.

Server Room Environments provides a complete project managed service including UPS site surveys, turn-key systems including PDUs (power distribution), UPS maintenance bypasses, network interfaces for remote monitoring, standby power generators for extended backup times, UPS installation and maintenance contracts.

Please contact our projects team for further information or see our 2000VA rated UPS systems.

Earn-sre-points

Earn SRE points on all online purchases with double points on selected products

World Leading Brands
Manufacturer Independent Solutions